An industrial enclosure is defined as a solution from a certain material designed to protect your electrical and electronic componentry from hostile environments. NHP offers a range of enclosures from economical terminal boxes through to larger wall mount enclosures and bayable floor mount enclosures. Our enclosure solutions are available in a range of materials including ABS plastic, glass-fibre-reinforced polycarbonate, aluminium, powder coated mild steel and marine grade 316L stainless steel.

NHP is proud to offer enclosure solutions from our Supply Line Partners Fibox and nVent HOFFMAN, which meet a range of global approvals.

Product highlights/range

  • Fibox ARCA Polycarbonate Enclosures
  • nVent HOFFMAN Stainless Steel Enclosures
  • nVent HOFFMAN Double-Skin Aluminium Enclosures
  • nVent HOFFMAN Mild Steel Enclosures
Fibox ARCA Polycarbonate Enclosures

  • 25 years’ life expectancy in full sunlight
  • Strength of steel with a fraction of the weight
  • Modular, click-in accessory range saves assembly time
  • Sizes from H200 up to H800mm

View range

ARCA_403015-500x500

nVent HOFFMAN Stainless Steel Enclosures

  • Smooth 400 surface finish inhibits microbial growth and tea staining
  • Include terminal boxes, standard wall mount enclosures and floor standing models
  • A dedicated Hygienic Design range is available for Food and Beverage and other chemical washdown applications
  • SRE models available in X15 orange powder coat finish

View range

SRE_family_1_e1_x15

nVent HOFFMAN Double-Skin Aluminium Enclosures

  • Corrosion resistant, marine grade aluminium
  • Highly vandal resistant
  • Unique double-wall design provides 80% better thermal performance when used outdoors in full solar load applications
  • Ideal for roadside cabinets in ITS applications
  • Available with VicRoads Type Approval

View range

nVent HOFFMAN double-skin aluminium enclosures

nVent HOFFMAN Mild Steel Enclosures

  • Comprehensive range of powder coated mild steel wall mount and floor standing enclosures
  • Floor standing enclosures in sizes from H1200mm up to H2000mm in single and double door versions
  • Floor standing models available in fully welded and bayable versions
  • Wall mount enclosures available in sizes from H200 x W200mm up to H1000 x W800mm

View range

 

Resources and downloads

Product brochures

For further information on the extensive range of enclosures, please download the product brochure below, contact your local NHP Account Representative or call us on 1300 NHP NHP

For a high level overview of NHP's range of enclosures, please take a look at the Enclosures Easy Selection Guide.

NHP Enclosures Easy Selection Guide

Enclosures technical downloads

  • nVent HOFFMAN STB Mild Steel Terminal Boxes

    STB-FL-001-EN-1

    STB Mild Steel Terminal Boxes

    nVent HOFFMAN STB mild steel terminal boxes are manufactured to the highest quality in light grey RAL 7035 powder coat finish. Perfect for indoor terminal, pushbutton or instrumentation applications, the STB range is available in two different depths to accommodate different requirements.

    Using 1.2mm mild steel, these enclosures are folded and fully seam welded and includes four pre-drilled holes for easy wall mounting. The IP66 rating is ensured by an injected one piece polyurethane gasket, guaranteeing protection against dust and water ingress.

    Download brochure

  • nVent HOFFMAN SSTB Stainless Steel Terminal Boxes

    SSTB-FL-001-EN-1

    SSTB Stainless Steel Terminal Boxes

    When it comes to the harshest of outdoor environments, only 316L marine grade stainless steel will do. The nVent HOFFMAN SSTB terminal box range is fully UL and IP66 certified with 316L grade stainless steel and a 400 dairy finish, ensuring your vital componentry is protected against the worst of seaside corrosion, outdoor elements and wash-down chemicals.

    With fully welded construction providing no bacteria contamination points, the SSTB range can be mounted any way you want. The special white gasket features higher UV and chemical resistance than traditional polyurethane (PUR) gaskets with almost zero water absorption for a longer life expectancy. Stainless steel wall mount brackets compliment the range as well as mild steel DIN rail supports and mounting plates.

    Download brochure

  • Fibox ARCA Polycarbonate Enclosures

    ARCA-BR-001-EN-1

    Fibox ARCA Polycarbonate Enclosures

    Fibox ARCA glass-fibre-reinforced wall mount cabinets enclose and protect your equipment and devices in all conditions, even the harshest and most demanding environments. The ARCA range is the future of wall mounted enclosures, combining the strength of steel with a lightweight, corrosion free and easy to machine material that has been tested to the equivalent of 25 years of UV exposure, making it ideal for outdoor applications.

    Download brochure

  • nVent HOFFMAN Stainless Steel Wall Mount Enclosures

    nVent_HOFFMAN_Wall_Mount_SS-BR-001-EN-1

    nVent HOFFMAN Stainless Steel Wall Mount Enclosures

    For aggressive environments where sea-air or corrosive elements are present, the nVent HOFFMAN 316L marine grade stainless steel ASR/ADR range is the solution. The design is characterised by a sturdy cruciform body, folded from a cold pressed sheet steel plate. The enclosure’s edge is folded in the shape of a channel to avoid water stagnating on the seal.

    Maximum protection for the user and the equipment is achieved thanks to the high protection degrees IP66 (single door), IP55 (double door). The ASR/ADR range features a high cleanliness design that eliminates places where dirt and bacteria can accumulate. The special white silicone gasket features higher UV and chemical resistance than traditional polyurethane gaskets with almost zero water absorbtion for a longer life expectancy.

    Stainless steel wall mount enclosures are often used in environments such as food processing, breweries, marine applications and any area exposed to corrosive chemicals. The enclosures can be secured to the wall using bolts, which are fixed directly through the rear wall of the enclosure and are protected inside with plastic washers, or wall mounting brackets, which are screwed at the rear of the enclosure. A range of accessories such as depth adjustment kits, inner doors, rain hoods (ASR/ADR) and various locking options complement the range and provide a comprehensive enclosure solution for all arduous locations.

    Download brochure

  • nVent HOFFMAN Stainless Steel Sloped Roof Wall Mount Enclosures

    nVent_HOFFMAN_SRE_Wall_Mount_SS-BR-001-EN-1

    nVent HOFFMAN Stainless Steel Sloped Roof Wall Mount Enclosures

    The nVent HOFFMAN Sloped Roof Wall Mount Enclosure feature a 38 degree sloped roof (the angle of repose of coal) and uses marine grade 316L stainless steel. With wall mounting flanges top and bottom for easy mounting, there is no need to drill extra holes into the enclosure, thus maintaining the IP66 integrity

    The special white silicone gasket features higher UV and chemical resistance than traditional polyurethane (PUR) gaskets, with almost zero water absorption for a longer life expectancy. Available in sizes from H300 up to H800mm and in both natural and X15 orange finishes, the SRE range is deal for mining, resources and dusty environments and heavy duty applications.

    Download brochure

  • nVent HOFFMAN Hygienic Design Stainless Steel Wall Mount Enclosures

    nVent_HOFFMAN_HDW_Enclosures_BR-001-EN-1

    Hygienic Design Stainless Steel Wall Mount Enclosures

    The wall mounted Hygienic Design HDW range is optimised for protection of electrical and electronic equipment in food processing and pharmaceutical applications. They are manufactured in high quality AISI 304 grade stainless steel, with a maximum protection degree of IP66 and IP69K to ensure your assets are protected in hot, high pressure wash-down environments.

    The enclosures have a self-draining design with 30º sloping roof to prevent tools or other objects from being left or placed on them and for fluids to drain off rapidly. The seal integrity is achieved via a removable one piece silicone gasket that is easy to clean and is replace. The hinges are inside the sealing zone to create an exceptionally easy-to-clean design on the outside and eliminate any external cavity between the enclosure and its door.

    The HDW range is especially suitable for applications in the food, beverage and pharmaceutical industries where the enclosures are cleaned at high temperatures with chemical agents. A range of dedicated hygienic design accessories is also available, enabling customers to tailor the enclosure to their specific needs. The enclosure design follows the principles stated in EC Directive 2006/42/EC, EN 1672-2, EN ISO 14159 and is also EHEDG certified according to the Hygienic Design guidelines 8 and 13.

    Download brochure

  • nVent HOFFMAN EKOM Aluminium Enclosures

    nVent_HOFFMAN_EKOM-BR-001-EN-1

    nVent HOFFMAN EKOM Aluminium Enclosures

    The EKOM range is designed with anti-vandalism and corrosion protection in mind. The aluminium construction and double wall design is an ideal solution for optimum heat management in the harsh Australian climate and satisfies the toughest demands in rail and roadway traffic applications and telecommunication systems.

    Download brochure

  • nVent HOFFMAN Floor Standing Enclosures

    nVent_HOFFMAN_Floor_Standing_BR-001-EN-1

    nVent HOFFMAN Floor Standing Enclosures

    The nVent HOFFMAN Floor Standing Enclosure range is available as fully welded and bayable models in single door and double door models in powder coated mild steel and 316L stainless steel finish. With heights from H1600mm through to H2000mm and a range of modular, click-in mounting and baying accessories, this range has been designed with ease of assembly in mind..

    Download brochure

X
Cookies help us improve your website experience.
By using our website, you agree to our use of cookies.
Confirm